ST-6 polar professional microphone (supercardioid, cardioid)

Introduction: For supercardioid directional condenser microphones, use a 48V phantom power supply on a professional mixer to work. Robust structure, designed for the important requirements of professional recording, broadcasting, and enhanced timbre. Can handle high sound pressure levels, providing a greater dynamic range. Smooth and stretchy frequency response. Supercardioid directional radio can reduce noise from both sides of the microphone to the rear, improving sound source reception. Low noise structure, suitable for advanced digital recording equipment. Enhanced reproduction of low frequency response. The lightweight radio head design provides greater instantaneous response.

Category：

Wired microphone

Service hotline:

0750-7779797

Online message

Detailed introduction

Vocal speech and instrument pickup with rich details
Directionality: Supercardioid orientation
Sensitivity: - 53dBv ± 1.5dB at 1kHz (0dB=1V/Pa)
Power supply: 8-50V phantom power supply, current about 1.8mA
Harmonic distortion: THD 0.7%/1KHz
Sound pressure level: 94dB/SPL
Signal-to-noise ratio: 70.7dB (A); 1KHz@1Pa (94 dB APL)
Built-in low frequency filter: 110Hz
Output terminal: built-in 3-pin XLRM Cannon male
Size: 140 × 20mm
Weight: 141g
Suitable for performing choruses with rich details
Directionality: cardioid orientation
Sensitivity: - 43dBv ± 1.6dB at 1kHz (0dB=1V/Pa)
Power supply: 8-50V phantom power supply, current about 1.8mA
Harmonic distortion: THD 0.7%/1KHz
Sound pressure level: 94dB/SPL
Signal-to-noise ratio: 70.7dB (A); 1KHz@1Pa (94 dB APL)
Built-in low frequency filter: 110Hz
Output terminal: built-in 3-pin XLRM Cannon male
Size: 140 × 20mm
Weight: 141g

Key words:

ST-6