Intelligent conference system has become an important application tool in enterprise management

Release time:

2021-06-24

With the continuous innovation of information technology, the rapid and convenient intelligent conference system has led to the rapid development of the intelligent conference system market. Nowadays, more and more enterprises are paying attention to the issue that office informatization and intelligence can save a lot of travel expenses and manpower and material resources. On the premise of saving enterprise costs, intelligent conference systems have become an important application tool in enterprise management. Intelligent conference systems have been widely accepted and used by domestic enterprises, advocating high efficiency and low carbon in modern office environments. However, when using conference systems, some human or non human factors often lead to failure. Below are some common faults and solutions.
1、 The audio horn of the intelligent conference system makes a noise or howls
1. "The microphone battery is low or the amplifier volume is adjusted too high, which can easily cause noise. It is recommended that users replace the microphone battery first or reduce the amplifier volume appropriately.".
2. "The microphone is too close to or directly facing the speaker, which can easily cause howling. Please adjust the distance and angle between the microphone and the speaker;"; Excessive amplifier volume can also cause howling. Try lowering the amplifier volume.
2、 Conference audio system microphone is silent
1. Check whether the microphone battery is dead; Whether the wireless microphone receiver is powered on; Is the connection between the receiver and the mixer connected or loose
3、 Intelligent conference system audio system horn does not sound
1. Check whether the power amplifier is turned on or the socket that powers it is powered on. Users often turn off the power supply of the device when shutting down the system.
2. If the power amplifier is turned on, check whether the system is muted or the volume played by the power amplifier is adjusted too low, so that the speaker is silent or the volume played is low.
3. If the amplifier is turned on, the volume is also adjusted, and the speaker still has no sound, check whether the power supply to the mixer is turned off The projector in the intelligent conference system does not light up: The projector in the intelligent conference system does not light up. Solution: There are usually two expressions for a projector that is not lit: A. The projector is not powered on; B. Power on without projection.
4、 How to gradually inspect the intelligent conference system?
Judge whether the projector of the intelligent conference system works normally
1: Is the projector power switch turned on and powered on, and does the indicator light illuminate?
The indicator light does not light up after powering on, indicating a problem with the projector. Generally, the hard switch power supply of the user projector is turned on for a long time, and the power indicator light is permanently on. Among them, yellow light: waiting; Green light: normal; Red light: power on
2. Are the LAMP and TEMP lights permanently on or flashing? (Displayed in red)
The LAMP indicator shows a red light indicating that the projector bulb is broken, reminding the user to replace the bulb. The TEMP indicator light displays a red light, indicating that the projector is in an incorrect state and cannot project, that the projector is in a self-protection state, or that the hardware is faulty.
3: Let the user connect the computer directly to the projector. Does the projector project? Do the port settings for the projector to receive signals match? (such as whether it is a VGA receiving port)
"When the projector is directly connected and the projector does not project, it indicates that there is a problem with the projector. If the projector projects normally, it indicates that there is a problem with other related devices or connecting lines connected to the projector.".

What if the microphone screams? Five Methods for Eliminating Microphone Feedback Whispering

without